YCE Magnesium Oxide Board (usually called MGO Board) is the building material widely used in the construction area. The stable magnesium colloid is reinforced by middle alkali glass fiber net and stuffed by light material then becomes new frameless decorative material. 100% no Asbestos Contained and no radioactivity.
Main Characteristic
1. Fireproof, non-combustible Class A1
2. Waterproof, moisture-proof, anti-corrosion, acid and alkali resistance
3. Heat insulation, and sound insulation.
4. Low shrinkage rate, light weight, and high strength, overall low density.
5.Smooth surface, can be painted, pasted tile, pasted wallpaper and other decorative materials.
6.Excellent fire resistance performance.Using 12mm thickness plate can be made partition, it can reach 4 hours of fire resistance.
7. Construction cost of low, and can be cut, saw,nail,and bent.
|
Normal Size
|
1220mm × 244mm or 1200mm × 2400mm
|
|
Max Width
|
1220mm
|
|
Max Length
|
3050mm
|
|
Thickness
|
3mm ~ 25mm
|
|
Color
|
White
|
|
Edge
|
Square / Tapered / Beveled / Tongue/Groove
|
|
Density
|
0.85 ~ 1.05kg/cm3
|
|
Water Content
|
≤20
|
|
Water Absorption
|
≤40
|
|
Fire Resistance
|
Incombustibility A Class(GB8624-A)
|
|
Thermal Conductivity
|
1.14m2.k/w
|
|
Bending Strength
|
>15 Mpa, the strength under the moisture absorbing condition is higher.
|
|
Impacting strength
|
Conforming to GB6566-2001 A1 Class
|
|
Asbestos Content
|
100% Asbestos Free
|
|
Rate of length change (wetting %) :
|
Below 0.26
|
|
Certification
|
SGS
|
|
MGO Board compare to other board
|
|
Item
|
MGO Board
|
Gypsum Board
|
Fiber Cement Board
Calcium Silicate Board
|
Plywood / OSB
|
|
Non combustible
|
Yes
|
No
|
Yes
|
No
|
|
Fire Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Moisture Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Water Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Mold Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Mildew Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Insect Resistant
|
Yes
|
No
|
Yes
|
No
|
|
Nail / Screws
|
Yes
|
Yes
|
Yes
|
Yes
|
|
No Special Tools (Cut / Saw)
|
Yes
|
Yes
|
No
|
Yes
|
|
Attached to Tile
|
Yes
|
No
|
Yes
|
No
|
|
Sound Insulation
|
Yes
|
No
|
Yes
|
No
|
|
Heat Insulation
|
Yes
|
No
|
Yes
|
No
|
|
No-toxic Green Environmental
|
Yes
|
No
|
Yes
|
No
|
|
Strong and Durable
|
Yes
|
No
|
Yes
|
Yes
|
|
Light Weight
|
Yes
|
No
|
Yes
|
No
|
Partition Installing Method
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with laterally supporting keel installed.
2. Board Material Package Fixed
a.Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b.Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally about 200~250mm with screws sinking 0.5mm under the board face.
c.The expansion seam of about 4mm between boards should be kept.
d.The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously to avoid generating inner stress to make board material bucking.
e.Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.
CHUAN YI ENTERPRISES CO., LTD.
Address: No.50 Lane 98, Li Teh, Chung Ho City, Taipei Hsien,Taiwan
Tel: 886 -02 -22224488 Fax: 886-02 -22232882
Email: info@ycefoamglass.com