Furan Resin Mortar
Furan Resin Mortar
Furan Resin Mortar

Furan Resin Mortar

Mã sản phẩm: Tình trạng: Còn hàng
Lượt xem: 2173
Price: Liên hệ
Số lượng:
Tổng tiền:

Lượt xem: 2173

Hotline: 886 -02 -22224488
Furan Resin Mortar Bình Luận

Furan Resin Mortar:
Furan Resin Mortar is widely used for Acid Resistant Bricks & Tiles lining works as Pointing & Jointing Mortar for
Tanks, Floor, Drain, Foundation, Chemical Reaction Vessels, and Neutralization Pit etc.

It is resistant to Non-Oxidizing Acids, Alkalies, Salt, Solvents, Greases, Detergents and Oils.Carbon Filled
It is to be used to resist hot & highly concentrated alkalies, Hydrofloric Acid, Flourid Salted etc.
Resistant to temperature:
170° C (Max.)
Preparation of Mortar:
Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working
consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly
vary depending upon the temperature and working conditions.
Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a
suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing
operation shall be continued until a uniform mixture is obtained.
Make sure that all the Mortar is used from the mixing pan before another batch is prepared.
Surface Preparation:
The cement plastered surface shall be slightly rough in line & level , dry & clean, free from dust,
dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in Acid
proof lining works.
Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are
mixed together.
An initial setting occurs in 6 to 8 hrs. at 30°C
Final Setting occurs in 24 to 48 hrs. at 30°C
Curing time: 7 days at 30°C
Please ensure that no water shall be spilled over the bricks lining works before it completely cured.
Mechanical/Physical property:
Working time at 30°C : 20 minute (min)
Density of cured mortar : 1.8 grm per cc
Bond strength : 10 Kg.Cm2
Compressive Strength : 350 Kg/Cm2
Flexural Strength : 75 Kg/Cm2
Water Absorption : 1%
Storage Life
Solution : 12 Months at the temperature 30°C (+2°C)
Powder : 6 Months at the temperature 30°C (+2°C)
All two components are stored in cool and dry place under the roof until ready to use it original
unopened (Sealed) containers.
Solution : 25 Kg. in M.S. Drum
Powder : 25 Kg. in Plastic Bag.
Export packing
( As per customer’s requirement)

Other products
Acid resistan brick

Acid resistan brick

Mã sp: Fiberglass Resilient Blanket
Price: Liên hệ
New products
Visitor online
^ Back to top